Sintec K Cobalt Chrome

CopraSintec K Blanks are isostatically pressed blanks made from biocompatible co/cr alloy for dental restorations. The alloy is mixed with a binder, which burns out without residue in the sintering process.

The sintering process requires an Argon atmosphere, Techceram recommend the Nabatherm LT 02/13 CR furnace for this process.

After sintering, the frameworks are grit blasted & trimmed and can then be veneered with porcelain or over pressed.
CopraSintec K Blanks can be milled wet or dry. The material does not absorb any water, it is not necessary to dry the milled restoration after milling in a long drying process.